Прямая замена OEM-завода Hugeminer Уплотнение Sandvik 78401289 — высококачественные уплотнения для горных буров Sandvik Ranger серии DX и Commando DC | 78401274

Fault: Persistent Hydraulic Oil Leak from the Feed Cylinder of a Sandvik Ranger DX800

Cause: Often, a leak in the feed cylinder of a Sandvik Ranger DX800 is caused by worn or damaged seals, such as the piston Seal 78401289 or Wiper 2847330. Repeated exposure to abrasive dust, excessive side loads, or simply reaching the end of the seal's service life can compromise its function.

Solution:

1. Identify: Locate the exact source of the leak (rod end or piston side).

2. Disassembly: Carefully disassemble the hydraulic cylinder, following all safety protocols.

3. Inspect: Thoroughly inspect the cylinder bore and piston rod for scratches or pitting. Any damage here will quickly destroy new seals.

4. Replace: Replace all seals and wipers using a complete Seal Kit 55030652 (55030652) or individual seals like 78401289. Ensure all sealing surfaces are clean and well-lubricated with clean hydraulic oil before reassembly.

5. Test: Reinstall the cylinder and cycle the system under low pressure before returning the rig to full operation. Always use quality heavy equipment spares.