Заводская мембрана прямого аккумулятора Hugeminer 9106184722 9106184722 для Epiroc Boomer L2C и Simba M6C — оригинальные запасные части для перфораторов

Epiroc Boomer L2C Drill Rig Hydraulic System Failure

Fault: Slow or erratic penetration speed on the Epiroc Boomer L2C face drilling rig, often accompanied by unusual noise from the rock drill (e.g., COP 1838 series).

Probable Cause: A common reason for this is the failure of the **Accumulator Diaphragm** (9106184722, 9106184722) in the rock drill's hydraulic accumulator. A ruptured or degraded diaphragm leads to a loss of the nitrogen gas pre-charge, causing the system to lose its ability to effectively dampen pressure peaks and store necessary energy for the percussion mechanism.

Solution/Treatment:

1. Immediately shut down the percussion system and ensure the machine is safely secured.

2. Vent the pressure from the hydraulic system.

3. Inspect and replace the faulty Accumulator Diaphragm (9106184722) with a high-quality replacement from Hugeminer.

4. Recharge the accumulator with nitrogen gas to the manufacturer's specified pressure (this is critical and requires specialized charging tools).

5. Test the rock drill's performance to ensure penetration and rotation are smooth and stable. Regular preventative maintenance, including pressure checks and seal inspection, is recommended.